/      _ _/  _  /  / 
(  /) _)  /  (/ (  (  
                      

===================================================
Oz Deathmatch

v 3.0

http://www.planethalflife.com/oz/
http://www.starbraker.com
http://www.sparksonline.org

Oz runs on version 1100 of Half Life or newer.
===================================================

 +-+ +-+ +-+ +-+ +-+ +-+ +-+ +-+ +-+
 |U| |P| |G| |R| |A| |D| |I| |N| |G|
 +-+ +-+ +-+ +-+ +-+ +-+ +-+ +-+ +-+
  +-+ +-+   +-+ +-+ +-+ +-+ +-+ +-+
  |O| |R|   |M| |A| |N| |U| |A| |L|
  +-+ +-+   +-+ +-+ +-+ +-+ +-+ +-+
    +-+ +-+ +-+ +-+ +-+ +-+ +-+
    |I| |N| |S| |T| |A| |L| |L|
    +-+ +-+ +-+ +-+ +-+ +-+ +-+


Read the changelog thoroughly.
If you are upgrading from a previous version, 
unzip (windows) or untar (linux) the files to 
a convenient location. Then make changes to match
your existing configs to the new ones.

IMPORTANT CHANGES:

1. You need to place the botcycle.txt file in the 
   /sierra/half-life folder. This is regardless
   of whether you are running the server in the oz
   or valve folder.

2. You need to set the "runfolder" cvar in the
   /cfg/rhobot.cfg file to point to the folder
   that you will run the server from.
   For example: runfolder "oz".
   The runfolder is where the server will look for
   your bot folder and nav folder.

3. You need to have a nav folder in the same folder
   you set as your run folder. If you are running a 
   linux server, the permisions must be set so that the
   user that the server is run as, has permissions to write
   to the nav folder. If the nav folder is not set up
   correctly, the server will crash at mapchange.

4. Make sure you place the rune model files in the 
   /oz/models or /valve/models folder, depending
   on where you are running the server from. Failure
   to have these models can cause the server to crash
   on startup.

5. You must replace your /valve/delta.lst file with the
   one included with oz 3.0, or the new advanced spectator
   modes will not function properly. 

===================================================

 +-+ +-+ +-+ +-+ +-+ +-+ +-+
 |W| |i| |n| |d| |o| |w| |s|
 +-+ +-+ +-+ +-+ +-+ +-+ +-+


Installation:  if you're using the Oz-3.0.zip, 
unzip it to Sierra/Half-Life/. 

If you are using the install exe just enter the 
path to your Half-Life directory and it will do 
the rest.

<------- IMPORTANT ----------->

NOTE: BACKUP YOUR CONFIG FILES BEFORE INSTALLING.

Allowing the delta.lst file to be overwritten should
not cause problems.

Make the changes you would like in the .cfg files
located in your /oz/cfg/ folder.

Note: if you DID NOT use the installer, 
the included Oz shortcut may need to be 
modified based on your system (IF you want to 
use the shortcut).  Currently, it will look 
for the hl.exe in c:\sierra\half-life.  
Just right click the shortcut and pick properties, 
then edit the command line for hl.exe.  
Everything else in that line MUST stay the same, 
otherwise the mod will not be loaded.  
If this mod was installed through half-life, 
you can "activate" it on the custom game menu.

===================================================

 +-+ +-+ +-+ +-+ +-+
 |L| |I| |N| |U| |X|
 +-+ +-+ +-+ +-+ +-+

Untar the .gz file to your /sierra/hlds_l directory.
Allowing the delta.lst file to be overwritten should
not cause problems.

Make the changes you would like in the .cfg files
located in your /oz/cfg/ folder.

Log in as the user you would like to run the server as.
Do NOT run the server as the root user.
cd to your hlds_l folder and start the server like so:

./hlds_l -game oz +maxplayers 16 +map frenzy 




The Oz Team hopes you enjoy Oz Deathmatch!

Half-Life is a trademark of Valve Software and Sierra Online, used with permission.
Oz Deathmatch is © Copyright Aftershock Productions, 1999 - 2000.
Oz Deathmatch is a trademark of AfterShock Productions.  All Rights Reserved.
PLASD is © Copyright and trademark of Lacking Imagination Enterprises. All Rights Reserved, used with permission.